undefined
Blog
How to effectively manage and maintain research on oil drilling machinery and equipment.
Release time:
2024-06-18
Equipment maintenance is one of the main aspects of equipment management. If maintenance work is not properly carried out during daily production, it can lead to frequent equipment failures and significantly impact production and personnel safety. As the production speed of modern enterprises continues to accelerate, the importance of equipment management is increasingly highlighted, making it a discipline that is developing rapidly. In actual enterprise equipment management, Wanweier should choose an appropriate equipment maintenance model based on the actual needs of the enterprise, as this will lay a good foundation for the long-term development of the enterprise.
1. The impact of traditional equipment maintenance models on drilling equipment management
Traditional equipment maintenance is performed only after equipment failure occurs, which often leads to a higher scale of failures and a greater frequency of occurrences. This significantly increases the overall maintenance costs of the equipment and raises the operating costs.
With the increasing demand for oil resources, the production tasks of oil companies in China are becoming heavier, and the drilling plans are becoming very rigid. Due to the inability of traditional maintenance models to perform regular maintenance on drilling equipment, failures can directly cause the entire drilling plan to be halted, which greatly impacts the overall production plan of the enterprise. If drilling plans in one area are delayed, it will also affect drilling plans in other areas, severely hindering the normal production of the enterprise and disrupting the overall development plan.
2. Various tasks that should be carried out in drilling equipment management
Wanweier's inspection of drilling equipment. This work should accompany the entire operational cycle of the drilling equipment, requiring not only a detailed and targeted inspection plan but also careful documentation of various inspection records after the inspection work is completed. This can serve as the basic data for future preventive maintenance of drilling equipment.
3. Proper maintenance work for drilling equipment
Before Wanweier performs maintenance on the equipment, they should not immediately disassemble it completely. Instead, they should first analyze the possible causes of the failure based on the symptoms presented, and then focus on inspecting the suspicious areas. During the actual maintenance, they should not disassemble everything at once but should find the cause while disassembling. Once the cause is found, they should not continue to disassemble further. For simple mechanical repairs, direct repair methods can be used. If encountering complex machinery, the design drawings should be located first, and the cause of the failure should be identified by comparing it with the drawings. During the disassembly and repair process, photos should be taken to prevent confusion about reassembly after repairs.
For the maintenance of the mechanical control parts, various sensors and relay devices should first be checked for faults, ensuring that the sensors have normal signal output and that the functions of the relay devices are intact. If there are no issues, the control circuits should be checked for any disconnections or short circuits, and any problems should be addressed promptly. If everything is intact, the central control system of the machinery should be opened, and the connections of various interfaces should be checked for security. Then, the control circuit board should be inspected for any damage or burn marks. If everything is normal, it indicates that some components on certain circuit boards have failed, and at this point, the board should be handed over to specialized maintenance personnel for repair.
4. The foundation of preventive maintenance work for drilling equipment
The foundation of preventive maintenance work refers to Wanweier establishing maintenance standards for each type of equipment based on the specific characteristics of each device, and using these established maintenance standards to formulate preventive maintenance plans for the equipment. Throughout the maintenance process of drilling equipment, five categories of maintenance standards should be established: operational, inspection, repair, and management. These five categories of equipment maintenance standards should be integrated throughout the entire operational cycle of the equipment to facilitate specific maintenance work.
Vanwell Oil Equipment(Tianjin)Co.,Ltd.
